NAME Module::Reload::Selective - Reload perl modules during development SYNOPSIS Instead of: use Foobar::MyModule; Do this: use Module::Reload::Selective; &Module::Reload::Selective->reload(qw(Foobar::MyModule)); Or, if you need the "import" semantics of "use", do this: use Foobar::MyModule (@ImportArgs); Do this: use Module::Reload::Selective; Module::Reload::Selective->reload(qw(Foobar::MyModule)); import Foobar::MyModule (@ImportArgs); ... then configure your server or other runtime environment settings to trigger Module::Reload::Selective to only kick in when you need. For example: you could have it kick in only when the web server is running on a particular port number or particular (development) host. OVERVIEW Utility for module developers to selectively reload needed modules and/or conditionally augment @INC with additional, per-developer library directories, at development time based on environment variables. Particularly helpful in conjunction with mod_perl applications where some or all application logic resides in separate Perl modules that would otherwise not get reloaded until the server restarts. Copyright (c) 2002, Chris Thorman. Released to the public under the terms of the Perl Artistic License. DETAILS This module defines a "reload" routine that scripts, CGI scripts, Embperl scripts, handlers, etc. can use to reload (re-require) a module or modules, optionally forcing the modules AND ANY MODULES THEY USE, recursively, to reload, even if already previously loaded and listed in %INC. The reloading feature is helpful for when you're actively writing and debugging modules intended to be used with Apache and mod_perl (either used by Apache::Registry or HTML::Embperl script, or handlers, or other mechanisms) and want to ensure that your code changes get reloaded on every hit, even if the module had previously been loaded into the parent or child process. In addition to the selective reloading feature, this module can also (optionally) dynamically prepend some additional paths to @INC to allow programmers to work on, test, and debug private development copies of modules in a private directory while other modules are loaded from a more stable, shared, or public, library directory. The @INC-modifying feature is helpful even if you're only developing command-line perl scripts in an environment where there are multiple programmers and an individual programmer, for testing purposes, needs to optionally load some modules under development from his or her own private source directory in preference to the "standard" locations. This is a common need when multiple Perl developers are working on the same Unix host. How this module differs from Module::Reload: * Module::Reload reloads just files that it sees have changed on disk since the last reload, whereas this module conditionally reloads based on other conditions at runtime; this module also has other features of convenience to develoepers. How this module differs from Apache::StatINC: * Reloads requested modules (recursively) regardless of modification date. * Skips reloading any modules that have been previously loaded from lib/perl* (or other customizable list of dir name patterns), so you can only reload items outside the standard library locations, by default. * Allows dynamic overriding of @INC on a per-USER basis. * This module lacks StatINC's ability to disable symbol-redef warnings, so best not to reload modules with const subroutines... (sorry). * Works outside of Apache as well as within it (not sure whether this is true of Apache::StatINC), so is testable from the command line, and even useful in a batch script context, if not for its reloading capabilities, then at least for its ability to override the search path on a per-USER basis, allowing the development and debugging of a private copy of a system-wide module or modules. * Works fine from within individual pages or scripts; does not necessarily need to be loaded at server startup time. * Is a no-op (does not reload) unless certain environment variables and/or options are set, allowing you to leave calls to it in production code with negligible performance hit on non-debugging servers. DISCUSSION To request that a module Foobar::MyModule, and any modules it calls, be reloaded, do this: use Module::Reload::Selective; Module::Reload::Selective->reload(qw(Foobar::MyModule)); This reloads the module, executing its BEGIN blocks, syntax-checking it, and recompiling any subroutines it has. Then, if you want to import any semantics from the module into the current namespace, you should directly "import" the module. import Foobar::MyModule (@ImportArgs); IMPORTANT: Under normal circumstances, reload will load the module normally with no difference from the usual behavior of "use" ... i.e. files won't be reloaded if they already have been, and no special modifications to @INC will be applied. BUT, if certain environment variables (see below) are set to non-false values, Module::Reload::Selective will force them and any modules THEY need, to be reloaded from their source file every time, also using temporary modifications to @INC. The variables are: $ENV{RLD} ## Useful for command-line testing/debugging prompt> RLD=1 perl index.cgi Just set this environment variable before invoking the script and the Reloader will be activated. $ENV{DEBUGGING_SERVER} ## Set this in the server startup At server startup, set the environment variable conditionally, only if you're starting up a private debugging server, say, on a different port. You could use something like this in a section in your httpd.conf, for example: if (($My::HostName =~ /^dev/) && $Port == 8081) { $User = 'upload'; $Group = 'upload'; print STDERR "Starting as user $User/$Group\n" if -t STDERR; push @PerlSetEnv, ['DEBUGGING_SERVER', 1]; ## Could also set other Module::Reload::Selective runtime options here. } RUNTIME OPTIONS Runtime options are initialized by Module::Reload::Selective when it is first "use"d, and may be overridden individually later before calling "reload", by setting a few elements of the $Module::Reload::Selective::Options hash, like this: $Module::Reload::Selective::Options->{SearchProgramDir} = 0; The available options, and their initial default values, are: ReloadOnlyIfEnvVarsSet => 1, ## If 0, always reloads, regardless of environment var settings ## described above. SearchProgramDir => 1, ## If 1, cur working dir of script, as determined from $0, will be ## added to the search paths before reloading. ## This is very handy for keeping private local copies of modules ## being tested in the same directory tree as the application that ## uses them. SearchUserDir => 1, ## If 1, "user dir" as determined by the other "User" options ## below, will added to the search paths, after ProgramDir. DontReloadIfPathContains => ['lib/perl'], ## List of strings that, if found in the loaded path of an already ## loaded module, prevent that module from being re-loaded. By ## specifying "lib/perl" (on Unix), no library modules installed ## in the standard perl library locations will ever be reloaded. ## Force reloading of those, too, by removing that entry, or add ## additional strings to disable additional subdirectories, ## perhaps ones of your own. FirstAdditionalPaths => [], LastAdditionalPaths => [], ## Lists; if non-empty, these specify additional paths to be ## searched before or after any of the obove options, but in any ## case always before any of the other locations normally in @INC. User => '', ## Name of user whose directory will be searched. DefaultUser => $ENV{RELOAD_USER} || $ENV{USER} || $ENV{REMOTE_USER}, ## Name of user whose directory will be searched if no User option ## is specified to override it. If empty, no user name will be ## used. UserDirTemplate => '/home/USER/src/lib', ## Path to search when looking for source modules in a User's ## programming directory. If "USER" is in the path, it will be ## substituted at runtime with the value of User or DefaultUser as ## appropriate. The resulting directory path is only added to the ## search paths if it actually exists. DEBUGGING & ANALYSIS OF WHAT GOT LOADED For debugging purposes, Module::Reload::Selective creates these hash references, in the same format as %INC, that show what the last "reload" command did. You can examine these (e.g. with Data::Dumper) after calling reload if you want to be sure that reload did its job. $Module::Reload::Selective::Debug->{INCHashBefore} $Module::Reload::Selective::Debug->{INCHashAfter} $Module::Reload::Selective::Debug->{NewlyLoaded} $Module::Reload::Selective::Debug->{Reloaded} $Module::Reload::Selective::Debug->{NotReloaded} $Module::Reload::Selective::Debug->{GotLoaded} NewlyLoaded -- modules that weren't loaded (from anywhere) prior to calling reload. Reloaded -- modules that previously appeared in %INC but got reloaded. NotReloaded -- modules that previously appeared in %INC but were not reloaded. GotLoaded -- The union of Reloaded and NewlyLoaded -- i.e. anything that got loaded as a result of the "reload" command. You can examine these by putting something like one of these statements in your code: use Data::Dumper; print &Dumper($Module::Reload::Selective::Debug); print &Dumper($Module::Reload::Selective::Debug->{GotLoaded}); For example, if you use HTML::Embperl, you could put the following line in your application: 
[+ &Dumper($Module::Reload::Selective::Debug); +]
... and comment it out when done: [# 
[+ &Dumper($Module::Reload::Selective::Debug); +]
#] Note: if you use "reload" to force a reload of all your modules into a virgin child process, the "NewlyLoaded" hash should be empty in a web server environment where the Web server has been properly configured to pre-load all necessary modules at server startup. You could use this side-effect as a way to test your server configuration to see if you've remembered to preload everything needed by your application at server startup; anything that shows up in NewlyLoaded is something you've forgotten to preload and you can fix that. To see what private version of @INC was used by "reload", have a look at this debugging variable: $Module::Reload::Selective::Debug->{INCArrayAfterModification} To see what time the last reload occurred, view this variable: $Module::Reload::Selective::Debug->{LastLoadTime} (This, along with the GotLoaded hash, will also help you reassure yourself that the things you wanted to reload really did get reloaded; if GotLoaded doesn't list your module, and/or LastLoadTime did not change, then something did not reload.) WARNINGS RELOADING IS RECURSIVE If you reload module A that uses module B, module B will be reloaded, too. This allows you to reload all related modules at one time. But if you're not working on A, only on B, it is more efficient to just reload module B. Don't reload more than you need, in other words. RELOADING CAN MESS WITH GLOBALS IN APACHE CHILD PROCESSES Note that the reloaded modules are loaded into the (child) process's global namespace and so will affect all applications served by the affected process... including any bugs you've introduced or modules that failed to compile. So if using Module::Reload::Selective for Web application development, each programmer should be testing with his/her own private Apache server, (possibly running on a unique port). This way when you force the reloading of a buggy version of a module, everyone else's runtime environment is not also screwed up. WARNING: SYMBOL REDEFINITION WARNINGS If the loaded module, or any module it reloads uses constant subroutines, as in constant.pm, you will get warnings every time it reloads. I tried to emulate a trick used by Doug MacEachern in Apache::StatINC to prevent this from happening, but in this version, I haven't been able to get that to work. Suggestions / fixes welcome. THANKS Thanks to Joshua Pritikin for suggestions and the use of the Module::Reload namespace. INSTALLATION Using CPAN module: perl -MCPAN -e 'install Module::Reload::Selective' Or manually: tar xzvf Module-Reload-Sel*gz cd Module-Reload-Sel*-?.?? perl Makefile.PL make make test make install SEE ALSO The Module::Reload::Selective home page: http://christhorman.com/projects/perl/Module-Reload-Selective/ Apache(3), mod_perl, http://perl.apache.org/src/contrib, Module::Reload, Apache::StatINC. The implementation in Selective.pm. The perlmod manual page. AUTHOR Chris Thorman Copyright (c) 1995-2002 Chris Thorman. All rights reserved. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.